acrylic mirror Mount to a smooth, rigid flat backing such as 5/8″ or 3/4″ plywood. The surface should be coated with a high quality paint or sealant to cover pockets and seal out moisture. Next, cover the surface with mastic or adhesive. Read More
Acrylic casting plate engraving will not burst edge, this situation is usually engraving machine spindle speed is not enough, or improper tool selection and other processing methods. Read More
The characteristics of PS raw materials determine that the use of universal glue for PS boards will turn white and the adhesion will be weak. Read More
Acrylic is a modern material with rich colors, fresh and bright, and excellent transparency.Acrylic is easy to change its shape after heating,good weather resistance,acrylic furniture Read More
Because of its low cost, lightweight, strength, and flexibility, it is easily transported, set up, or stored as needed. Its high-quality finish gives it a fresh Read More
Our saws and routers leave beautiful chip-free edges on the parts we cut. Be careful with touched edges. While this edge isn’t as sharp as glass, if you move your hand quickly down the acrylic edge under pressure, you could get a “kirigami” type of injury. Solution: Use #100 grit sandpaper and abrasive blocks. Just […] Read More
There is nothing frustrating than a crack in a piece of acrylic sheet. Because this materials is “notch sensitive”. By the way, so is glass! That’s why you can scribe and break glass (and Plexiglas®) along the scribe. These materials have no grain and therefore cracks can travel as they please. However, cracks can […] Read More
Most hand tools designed for use with wood or soft metals are suitable for use with perspex Read More
Transparent: Allowing light to pass through so that objects behind can be distinctly seen. Translucent: Allowing light, but not detailed images, to pass through. Opaque: Not able to be seen through; no light passes through. 0 0 0 0 0 0 0 0 00Join our list to our ing list and get interesting stuff and […] Read More